Image 1 of 3
Image 2 of 3
Image 3 of 3
Audio-Technica AT-VM610MONO Phono Cartridge
Dual Moving Magnet Mono Cartridge for Mono Vinyl LP records.
Designed for playing Mono Vinyl LP records, Audio-Technica’s VM610MONO Dual Moving Magnet Cartridge is equipped with a conical bonded stylus less likely to be affected by placement and boasts stable tracking performance.
Dual Moving Magnet Mono Cartridge for Mono Vinyl LP records.
Designed for playing Mono Vinyl LP records, Audio-Technica’s VM610MONO Dual Moving Magnet Cartridge is equipped with a conical bonded stylus less likely to be affected by placement and boasts stable tracking performance.
With a specialized body and internal wiring dedicated to monaural sound reproduction, the VM610MONO conical stylus cartridge is designed for playing mono records. Part of the 600 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges – the VM610MONO is equipped with dual magnets that are internally connected to reduce record noise and obtain a highly focused “center” sound image that stereo cartridges can’t provide. Includes mounting hardware.
-
Frequency Response: 20 - 20,000Hz
Vertical Tracking Angle: 23˚
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000Ω
Coil Impedance: 1,400Ω (1kHz)
Output Voltage: 3.0mV (1kHz, 5cm/sec.)
Stylus Shape: Conical Bonded
Cantilever: Aluminium Pipe
Static Compliance: 35 x 10-6 cm/dyne
Dynamic Compliance: 8 x 10-6 cm/dyne (100Hz)
Mounting: 1/2” centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance: 100 – 200pF
Replacement Stylus: VMN10CB
Stylus Size: 0.6 mil
Type: VM Type
Weight: 6.4g
-
Dual Moving Magnet Mono Cartridge for Mono Vinyl LP records.
Designed for playing Mono Vinyl LP records, Audio-Technica’s VM610MONO Dual Moving Magnet Cartridge is equipped with a conical bonded stylus less likely to be affected by placement and boasts stable tracking performance.
Dual Moving Magnet Mono Cartridge for Shellac or Phonograph records.
Model dedicated to 78 RPM records, whose round stylus has a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.
Aluminium cantilever
Para-toroidal coils improve generating efficiency
Mono body terminating left and right channels reduces surface noise
Durable low resonance polymer housing
The HMD 025 is features our traditional true mono moving-coil generator, which has proven itself over decades in broadcast studios all over the world. The new body design makes it possible to bring professional EMT technology to your personal hi-fi system, letting you enjoy the intoxicating musicality of this outstanding transducer.
With the TMD 065, EMT offers a professional solution for the professional playback of shellac records.
The TMD 025 features a true mono transducer with only one winding. It is ideally used for playing early mono LPs.
The TMD 015 features a true mono transducer with only one winding. It is ideally used for playing modern mono LPs.
The TSD SPH features a spherical stylus, as they were generally in use before 1980. This design can produce excellent results on early stereo LPs.
The TSD SLF is equipped with the traditional EMT stereo generator, which has confirmed its undisputed musical quality over decades of worldwide broadcast use.
The generator of the TSD MRB features the high polished stylus. It offers highest resolution tracking which gets out every little detail of the music and fits perfectly in any modern high-end setup.
All EMT Novel products feature the innovative EMT multi-layer core transducer technology. The coil core is designed in two parts and is arranged around a carrier made of high-strength titanium, which encloses the sapphire needle carrier. Incredible realistic performance is achieved, while at the same time the tried and trusted EMT typical specs are respected.
New!
The MK II upgrade to our globally best-selling Hana S series cartridges enhances their musical performance and value.
Hand built MONO moving magnet cartridge in our custom body designed specifically for 78 rpm record playback.
Our styli used in all type of MONO have the edges of the diamond shank set parallel to the sides of the cantilever. Using this type of stylus, the hardest axis of the crystal is aligned to act as the contact point with the record groove. This gives stable and smooth tracing and produces a very refined sound, with the additional benefit of giving the stylus an extended life. The contact point of the stylus is of course spherical, and its contact radius is 1.0mil with refined mirror finish.
Our styli used in all type of MONO have the edges of the diamond shank set parallel to the sides of the cantilever. Using this type of stylus, the hardest axis of the crystal is aligned to act as the contact point with the record groove. This gives stable and smooth tracing and produces a very refined sound, with the additional benefit of giving the stylus an extended life. The contact point of the stylus is of course spherical, and its contact radius is 1.0mil with refined mirror finish.
Our styli used in all type of MONO have the edges of the diamond shank set parallel to the sides of the cantilever. Using this type of stylus, the hardest axis of the crystal is aligned to act as the contact point with the record groove. This gives stable and smooth tracing and produces a very refined sound, with the additional benefit of giving the stylus an extended life. The contact point of the stylus is of course spherical, and its contact radius is 1.0mil with refined mirror finish.


VM95 series 78rpm SP cartridge. Also available pre-mounted on AT-HS6 Headshell.
Since SP records have monaural modulation, when combining an SP stylus with a stereo body, such as the AT-VM95SP, it is recommended to use the “MONO ON” function “ of your standard Stereo Phono Preamplifier to minimize record surface noise.
AT-VM95SP, as stereo cartridge for SP mono records, when used with a dedicated archiving phono preamplifier equalizer incorporating various functions to generate a mono signal from Stereo inputs (Mono L+R, Mono L, Mono R, LR Variable Mix) allows professional archivers to minimize noise and distortion by sampling the least damage side of the grooves from an old record.
3mil SP stylus for reduced record surface noise
Aluminium cantilever
2.7mV output voltage
Compatible body with all VM95 Series stylus assemblies