Image 1 of 2
Image 2 of 2
Rega NEO PSU MK2
The new Neo MK2 is housed in a redesigned case to bring it in line with other products in the range creating an improved family feel. The Neo MK2 PSU is an advanced turntable power supply providing user controllable fine speed adjustment, an advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo MK2 will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy.
The new Neo MK2 is housed in a redesigned case to bring it in line with other products in the range creating an improved family feel. The Neo MK2 PSU is an advanced turntable power supply providing user controllable fine speed adjustment, an advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo MK2 will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy.
The Neo MK2 PSU is compatible with the following Rega turntable models:
P3-24 / RP3 / Planar 3 2016-current / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with our aftermarket 24v upgrade kit.
Using the same DSP (digital signal processing) generator found in the Planar 10 power supply the Neo MK2 is built upon a high stability crystal.
The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed whilst producing a near perfect sinusoidal waveform to drive the 24v motor. Fine speed adjustment is made via the rear panel using the supplied custom Neo trim tool (supplied).
Planar 6 and Planar 8 turntable models which include the Neo will now ship with the MK2 Neo supplied as standard.
-
Output to motor bi-phase: 24 V AC protected by resettable fuse
Power consumption: 7.2 W
Voltage: 24 V AC
Power supply: Rega PS1 only
Speed control step size: 0.01 RPM
PS1 (UK): Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (EU - Euro 2 pin): Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (American): Input 115-120 V ~ 60 Hz / Output 24 V ~ 350 mA AC
PS1 (Australian): Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (Japan): Input 100 V ~ 50/60 Hz / Output 24 V ~ 350 mA AC
PS1 (Korea): Input 220 V ~ 60 Hz 0.07 A / Output 24 V ~ 350 mA AC
Custom made premium Reference EBLT drive belt. Fitted as standard to all Planar 8 and Planar 10 turntable models from March 8th 2021.
The Rega Reference EBLT drive belt is the culmination of many years of R&D and advanced tooling trials. The most accurate drive belt we have ever produced, the Reference EBLT is now fitted as standard to all Planar 8 and Planar 10 turntable models as standard. The Reference belt is suitable for all Rega turntables but highly recommended for the Planar 6 and any Planar 3 using the Rega Neo TT PSU.
Each belt is moulded on our highly accurate custom tooling using a unique secret blend. Once moulded, the belts are cryogenically frozen and barrelled to remove any excess flash in order to create perfect cross sectional roundness which is critical for accurate speed and stability. In normal use and conditions, the lifespan of the EBLT drive belt is 50% longer than the previous model. All Reference belts go through a unique curing process which guarantees the highest achievable level of accuracy.
Designed to fit the RP8 & RP10 turntables these solid aluminium feet replace the factory fitted inner plinth feet, these will offer a subtle difference when the turntable is mounted on various surfaces whilst guaranteeing the player remains 100% level.
Made from aluminium, with a simple screw thread fit.
*Not suitable for the latest PL8 or PL10 models*.
This accessory is designed to evaluate the speed of any turntable. The hand-held strobe unit generates a 100 Hz pulsed light source for use with the supplied 180-line stroboscopic disc.
Designed as the perfect partner for the speed adjustable Rega Neo PSU. Simply place the supplied stroboscopic disc directly on the turntable mat. With the player running at 33⅓, 45 or 78 RPM, hold the strobe LED directly above the lines to evaluate theNeo PSU speed of the turntable.
Replacement smoked dust cover for all full-size Rega turntables.
Constructed from smoked GPPS material, supplied hinged with a Rega badge.
Do not use cleaning fluids, only use a damp clean cloth if necessary.
Replacement clear dustcover for all full-size Rega turntables.
Constructed from clear GPPS material, supplied hinged with a Rega badge.
Do not use cleaning fluids, only use a damp clean cloth if necessary.
This kit includes the low noise, low vibration 24v motor designed and developed for our range of multi award-winning 24v turntables. Designed with a simple fixing solution to fit all previous Rega turntables that do not already use 24v technology.
The ultimate in vibration isolation for your turntable, the next generation of turntable wall bracket is manufactured from lightweight 3mm laser cut folded aluminium.
This completely new design is 1.2 kg lighter and more rigid than the previous model and is specifically designed to complement the latest range of lightweight Rega turntables.
Designed for Planar 1, Planar 2, Planar 3, Planar 6 and many older Rega models.
Not suitable for the current Planar 8 or Planar 10 models, a smaller dedicated P8/ P10 wall bracket is available for these skeletal models.
Adjustable for use on uneven walls.
Simple screw fit adaptors are available to fit the older, RP8 and RP10 turntables.
Available in black or white.
A custom ultra-lightweight 2mm aluminum wall bracket designed specifically for the latest Planar 8 and Planar 10 turntables. The wall bracket will deliver the best performance from your turntable by providing complete isolation.
Available in black or white.
Adjustable for use on uneven walls.
Not suitable for RP8 or RP10.
The Rega Atlas Tracking Force Gauge MK2 is designed to be easy to use, consistent and exceptionally accurate. Our engineers have meticulously selected each component to offer the highest possible performance.
The new Neo MK2 is housed in a redesigned case to bring it in line with other products in the range creating an improved family feel. The Neo MK2 PSU is an advanced turntable power supply providing user controllable fine speed adjustment, an advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo MK2 will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy.
The record adaptor has been designed to be used with your 45rpm records that no longer have the centres, enabling you to play your old favourites.
The adaptor is simply fitted over the spindle of your turntable and the record will fit the outside of the adaptor. Then simply sit back, switch on and enjoy the music.
Some other manufacturers cartridges may have a deeper body than Rega cartridges, these will sometimes require the use of the three-point spacer to allow clearance of the rear of the cartridge from the vinyl.
When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our Rega arm spacers to achieve the correct arm height.
Note: On Rega turntables, spacers should not be necessary unless you are you using an exceptionally deep-bodied cartridge from another manufacturer.
Arm height or V.T.A adjustment can be a controversial subject. Rega believes that the integrity of the arm fixing onto the arm mounting board is much more important than the questionable facility of arm adjustment. The arm should be reasonably parallel to the record surface or slightly lower at the mounting. The only time a spacer is necessary to raise the arm height is if the rear of a cartridge is hitting the record whilst playing.
Some other manufacturers cartridges may have a deeper body than Rega cartridges, these will sometimes require the use of the three-point spacer to allow clearance of the rear of the cartridge from the vinyl.
When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our Rega arm spacers to achieve the correct arm height.
Note: On Rega turntables, spacers should not be necessary unless you are you using an exceptionally deep-bodied cartridge from another manufacturer.
Arm height or V.T.A adjustment can be a controversial subject. Rega believes that the integrity of the arm fixing onto the arm mounting board is much more important than the questionable facility of arm adjustment. The arm should be reasonably parallel to the record surface or slightly lower at the mounting. The only time a spacer is necessary to raise the arm height is if the rear of a cartridge is hitting the record whilst playing.
Designed to allow your Neo PSU or MK2 TT-PSU to be positioned further away from the turntable if desired.
This 2m custom version of the Neo / TT-PSU DIN lead is a custom made Power DIN to Power DIN.
Only works with Neo or MK2 TT-PSU and newer manufactured from 2011.
Not compatible with MK1 TT-PSU.
Custom made high-quality Advanced EBLT drive belt.