Audio Note M1 Pre-Amplifier

Please contact us for pricing information.


Audio Note (UK) M1 Line Pre Amplifier is a pure Class A, Zero Negative Feedback design, employing a single ECC82 dual triode valve.

It has been specifically engineered for sonic performance rather than technical specification, and offers an outstanding level of performance and value.

It fulfils all Audio Note (UK) Level 1 criteria: -

• Pure Class A operation

• Zero negative feedback

• Materials and component quality​

The M1 Line and M1 Phono are phase inverting.

Please contact us for pricing information.


The Audio Note (UK) M2 Pre Amplifier has been specifically engineered for sonic performance rather than technical specification, and fulfils all Audio Note (UK) Level 2 criteria:

• Pure Class A operation

• Zero negative feedback

• Single Ended circuit topology

• Valve rectification

• Materials and component quality

Please contact us for pricing information.


The Audio Note (UK) M3 Line Pre Amplifier has been specifically engineered for sonic performance rather than technical specification, and fulfills all Audio Note (UK) Level 3 criteria: -

• Pure Class A operation

• Zero negative feedback

• Single Ended circuit topology

• Valve rectification

• Materials and component quality

Please contact us for pricing information.


On Demo !

The Audio Note (UK) M5 Pre Amplifier has been specifically engineered for sonic performance rather than technical specification, and fulfills all Audio Note (UK) Level 3 criteria: -

• Pure Class A operation

• Zero negative feedback

• Single Ended circuit topology

• Valve rectification

• Materials and component quality

Please contact us for pricing information.


The Audio Note (UK) M6 preamplifier has been specifically engineered for sonic performance rather than technical specification, and fulfils all Audio Note (UK) Level 4 criteria: -

• Pure Class A operation

• Zero negative feedback

• Single Ended circuit topology

• Valve rectification

• Materials and component quality

Please contact us for pricing information.


The Audio Note (UK) M8 Pre Amplifier has been specifically engineered for sonic performance rather than technical specification, and fulfils all Audio Note (UK) Level 5 criteria: -

• Pure Class A operation

• Zero negative feedback

• Single Ended circuit topology

• Valve rectification

• Materials and component quality

Please contact us for pricing information.


The Audio Note (UK) M9 Pre Amplifier is without doubt or question, the finest Phonostage equipped preamplifier we have ever produced, and the Line Stage is only surpassed in performance by our own M10 Line. As one would expect, no expense has been spared in the construction of the circuit or the components used, and is a full Audio Note (UK) Level 5 product.

Please contact us for pricing information.


The Audio Note (UK) M10 Pre Amplifier is without doubt or question, one of the finest Line Level preamplifiers in production today, only surpassed in performance by our own M10 Signature, and is a full Audio Note (UK) Level 5 product.

On demo!

The fundamental function/responsibility of pre-amplifiers in audio systems is to accept various audio signals, select one, adjust the volume level, and then feed it to the power amplifier with good signal conditioning.

The PREDA-III faithfully executes these tasks by employing a true balanced signal path coupled with a completely independent L/R monaural structure. The PREDA-III accommodates both XLR balanced and RCA unbalanced inputs for devices such as CD players, DACs, phono stages, tape decks, etc. Additionally, the outputs of both XLR balanced and RCA unbalanced perfectly match any type of power amplifier.

Our Prima preamp forms part of the stylish and compact Choral range and has been designed to complement our Etude power amps. Despite its compact dimensions and space-saving footprint, the Prima is every bit a pedigree Chord Electronics amplifier.

Please contact us for pricing information.


The ULTIMA PRE 3 is an all-new ground-up-design preamplifier containing the very latest proprietary power supply technology and the latest circuit design. 

Built from the ground up, the UTLIMA PRE 3 takes advantage of the very latest developments in advanced low-distortion power supplies. These advanced devices offer exceptionally low noise and outstanding amplifier operation. Coupled with our latest design developments, the PRE 3 offers new levels of preamplifier performance.

Please contact us for pricing information.


Featuring unrivalled connectivity and minimal colouration, the ULTIMA PRE 2 can be the hub of your Hi-Fi system without taking anything away from the incoming signal.

The fully modernised ULTIMA PRE 2 is built to complement stereo systems of the highest order and represents the finest Chord Electronics engineering inside and out.

Please contact us for pricing information.


Our flagship preamp, ULTIMA PRE neither adds to or takes away from, the precious incoming signal.

Designed to be entirely uncompromising, the ULTIMA PRE is a world-class amplifier with advanced proprietary Chord Electronics technology. A product of three decades of research, design and engineering here in the UK, it benefits from true dual-mono construction with separate ultra-high-frequency power supplies for each channel, giving the best possible separation. With the addition of valuable low-noise circuitry, the noise floor performance is exceptional, at beyond -117dB.

An attractive custom vacuum tube control amplifier.

Breathtakingly realistic, full of harmony A flagship model that breathes new life into the listening experience.

At LUXMAN, we don’t consider a technology “advanced” unless it advances your ability to delight in music. That principle reaches its highest expression in the CL-1000, our flagship vacuum tube control amplifier.

Engineered for ultimate distortion-less sound with hi-fi inputs and modern streaming and control features, the Onkyo P-80 Network Preamplifier is fully equipped to deliver a sublime audio experience through your amplifier and onto your ears.

The new XP-12 starts with a new power supply. It uses an efficient toroidal design with both an electrostatic and Mu metal shield along with vacuum impregnating and epoxy fill. This gives us a very quiet transformer both electrically and mechanically.

The new design uses double-shielded low noise toroidal transformers in external supply.

The XP-32 is a three-piece modular preamplifier consisting of one control/power supply chassis and two additional gain chassis each containing analog signals of a single channel. The XP-32 generates less noise, crosstalk and distortion while delivering greater dynamic range, gain, output voltage and output current. But it is the sound, not the technical excellence, that truly makes this a breakthrough instrument.

This large, dual-chassis preamplifier is built in true dual-mono arrangement. Each channel has its own power supply board with over 100,000uf of capacitance for unfettered transient response. Noise levels have been dropped from the already low-noise XP30. Refined circuit design and layout, new gain-stages with auto-bias and DC compensation all combine for optimal performance. But it all comes down to sound; once you listen to the Xs preamplifier, there is no going back.

The main development objective for the Mercury was to create a no compromise audio pre-amplifier. The Mercury is hand crafted to reveal the true potential of your hi-fi system thanks to an ultra-low noise floor which delivers exceptional dynamic range. The Mercury pre-amplifier, like the Solis, is the culmination of almost four decades of Rega electronics engineering experience in solid-state amplifier development. 

PREAMPLIFIER – available in Premium Silver/Premium Black.

Fully integrated ultralow-loss custom relay RSR-2-12D and naked foil resistor. A monster preamplifier for truly live and enjoyable music performances!

A high quality active pre-amplifier featuring a host of inputs and outputs. The LA-4 makes a perfect combo with either the Masterclass or Sapphire power amplifiers. High-end touches include gold plated circuit boards, relay switching of all inputs and output and a sophisticated class A output stage. The LA-4 is a high gain amplifier that provides an iron fist of control over any power amplifier.  The electronic circuitry has been developed to offer the best possible sonic performance without compromise including the use of specially selected transistors and capacitors to provide the best signal preservation.  The gain stages are each powered by current shunt differential power supplies, which enable the fastest transients and most powerful crescendos with true musical empathy.

With an extensive range of input options, the DAP-800 can be the control centre of your audio system. A total of six analogue inputs and six digital inputs are available as well as two single ended and one balanced output.  The DAP-800 has been carefully designed to operate in two separate domains, analogue and digital. For each circuit we use independent power supplies throughout so in effect there is a separate DAC and analogue pre-amp housed in a single chassis.