Made specifically for mono recordings, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/SP also has an adapted vertical compliance.
Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.
The average usage time is 500 hours extending the life span of precious mono recordings.
High purity PCOCC allows a more transparent signal transmission offering a high efficiency and a high fidelity.
To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.
“A True Mono Cartridge”
The AT-MONO3/SP cartridge only generates electrical signal with horizontal movement due to the horizontal configuration of the coil.
“500 Hours of Use”
The average usage time is 500 hours extending the life span of precious mono recordings.
-
Frequency Response: 22 - 22,000 Hz
Vertical Tracking Angle: 23°
Vertical Tracking Force: 3 to 7 g (standard 5.0 g)
Stylus Construction: Nude Square Shank
Recommended Load Impedance: 400 - 47,000 ohms
Coil Impedance: 40 ohms (1 kHz)
DC Resistance: 40 ohms
Coil Inductance: 190 µm (1kHz)
Output Voltage: 1.2 mV (at 1 kHz, 12 cm/sec)
Stylus Shape: Conical
Cantilever: Aluminum Pipe
Static Compliance: 10×10-6cm/dyne
Dynamic Compliance: 3.5×10-6cm/dyne (100Hz)
Mounting: 1/2" Centers
Dimensions: 16.0 (H) x 16.6 (W) x 26.5 (L) mm
Accessories Included: Screwdriver, 4 screws, 2 washers and 2 nuts, spacer/weight, stylus brush
Body Material: Aluminium/Synthetic Resin
Stylus Size: 2.5 mil
Type: Horizontal Mono Moving Coil
Weight: 6.8g
-