Image 1 of 3
Image 2 of 3
Image 3 of 3
ISOL-8 MiniSub Wave & MiniSub Axis
The MiniSub has always been at the heart of ISOL-8, providing class leading performance at an affordable price. Improving the MiniSub was a real challenge, thousands of satisfied MiniSub owners across the world proved that it was going to be a difficult act to follow. Through careful development and adaptation we have managed to incorporate many of the innovative technologies found in the highly regarded flagship ISOL-8 SubStations, taking the all new MiniSub Wave and MiniSub Axis a substantial step forward whilst remaining outstanding value for money.
The MiniSub has always been at the heart of ISOL-8, providing class leading performance at an affordable price. Improving the MiniSub was a real challenge, thousands of satisfied MiniSub owners across the world proved that it was going to be a difficult act to follow. Through careful development and adaptation we have managed to incorporate many of the innovative technologies found in the highly regarded flagship ISOL-8 SubStations, taking the all new MiniSub Wave and MiniSub Axis a substantial step forward whilst remaining outstanding value for money.
MiniSub Wave
Both the MiniSub Wave and MiniSub Axis share the same fundamental layout and filter complement. The differing technical requirements of low and high current loads are reflected in the separated filter topology found in both versions.
For low current loads, such as source components, each outlet has a separate filter network. This is the feature that made the original MiniSub such a ground breaking product. It reduces system component cross contamination, stopping mains borne noise from one system component affecting others.
Unlike most other conditioners, which only deal with common mode noise, the low/med power outlets can suppress both common and differential mode noise, armed with a new Transmodal filter topology.
For more demanding loads, the separate high power section gets a new multistage filter using custom wound components. This cleans current hungry, noisy components like amplifiers much more effectively than before, without squashing dynamic performance.
MiniSub Axis
The MiniSub Axis has exactly the same layout and filter complement as the MiniSub Wave but takes performance another step forward with the addition of Axis DC blocking. A significant DC component is commonly found on the mains power supply. It affects the crucial magnetic circuit of your equipment’s AC power supplies, degrading system performance and causing acoustic noise through mechanical vibration. The MiniSub Axis ensures your system will be free of any of the negative effects of DC on the mains.
We take pride in continuing to bring our outstanding build quality to the new MiniSubs, making them an investment that provides unbeatable performance and will last a lifetime. Inside the quality casework you will find the same carefully auditioned polypropylene capacitors, Mundorf OFC inductors, high grade connectors, and custom ISOL-8 chokes that are found in our high end audiophile products. You will also have the peace of mind that comes with our spike and surge protection. All ISOL-8 products are designed and manufactured in the UK and come with a five year guarantee in the UK.
The result of an extensive development program, the next generation of the MiniSub takes its class leading performance to a whole new level in every area, helping your system to fulfil its maximum potential every time you listen.
-
Number of available outlets: 6 (4 low/med current -- 2 high current)
Type of outlets available: 13A British chassis sockets -- European Schuko sockets15A -- US sockets
Standard Mains Inlet: 10A IEC fused at 10 Amps (cable not supplied)
Dimensions: 444 x 85 x 305mm (W x H x D) excluding connectors
Product Weight: 6.5Kg (MiniSub Wave) -- 6.7Kg (MiniSub Axis)
Construction: Steel chassis with black finish -- Silver Aluminium front panel (Black optional)
Mains Voltage: 230VAC version for 220-240VAC -- 117VAC version for 100-127VAC
Maximum Continuous Current: 6 Amps any one low/med power outlet -- 6 Amps across all low/med power outlets -- 10 Amps any one high power outlet -- 10 Amps across all high power outlets -- 10 Amps across all outlets
-
The e-TP60E NCF is a high-end power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.
Inputmodule with four Schuko-outlets. The built-in OVERVOLTAGE PROTECTION ensures electrical safety by keeping away all voltages higher than 250 V from all connected devices. The current input connector is a professional 32 A NEUTRIK-PowerCON with cable lock.
The new second input module
Input module with six Schuko outputs. Electrical operational safety is ensured by the built-in SURGE PROTECTION, which keeps all voltages above 250 volts away from all connected devices. Power input is done with a professional 32 A NEUTRIK – PowerCON connector with cable locking.
The PMS X 2 INPUT FILTER power distributor combines the INPUT and FILTER modules into one device. This saves space. The 6 outputs (gray=filtered, black=unfiltered) can be scheduled as needed.
The SIGNATURE versions of the PMS INPUT X power distributors are the perfect solutions when very high quality requirements are to be met.
„HF-purified“ current:
Power supply systems are excellent antennas for high-frequency interference, generated e.g. from mobile phones. With the mains power, line-connected clocked frequencies and disturbances are transported, which are generated by all types of household appliances, switching power supplies and energy saving sources. These disturbances together produce technical faults in all devices up to defects.
"RF-purified" current:
Power systems are excellent antennas for radio frequency interference emitted by mobile phones, among other things. The mains power is also used to transport wired frequencies and interference generated by all types of household appliances, switched-mode power supplies and energy-saving light sources. Together, these faults create technical malfunction and even defects in all devices.
The PMS FILTER X SIGNATURE power distributor is equipped with a high-frequency filter of the latest design. This filter is symmetrically constructed, 2-stage with a current carrying capacity of 30A. This guarantees the best RF interference attenuation without negative sound influences.
The problems caused by frequently occurring changes in the current (mains frequency, sine function of the mains curve, frequency cuts, DC components, compensation currents etc.) are avoided by the use of an isolation transformer.
For large transformers:
Integrated and power amplifiers are equipped with large power supply units. In order to supply these optimally, large isolating transformers are necessary. Because of their sizes and weights, they cannot be integrated into the PMS plug-in system. Therefore, we have developed the module TRAFO CONTROL. This includes all the techniques necessary for the operation of large transformers and their protection.
DC FILTER 16 A / 230 V with two Schuko output sockets and Neutrik PowerCon - current input. A high-quality power cord with a length of 1.0 m is included.
The DC 2 will be integrated between your wall outlet and power distribution system, or you can connect appropriate devices directly.
DC FILTER 16 A / 230 V with two Schuko output sockets and Neutrik PowerCon - current input. A high-quality power cord with a length of 1.0 m is included.
The SIGNATURE versions of the LS 2 power distributors are the perfect solutions when very high quality requirements are to be met. The Schuko outlets are extremely high-quality VIBORG sockets with contacts made of pure copper/silver/rhodium, mechanically designed to the highest quality. The wiring consists of 4 mm² wires made of pure copper, all individually on distribution blocks affiliated.
A power distribution unit at the highest technical and professional level. The shielding aluminum housing with massive side panels ensures mechanical quality, while socket inserts with copper contacts and internal wiring with pure copper conductors guarantee the lowest possible contact resistance and perfect potential equalization.
The PX 2 Filter is equipped with:
Power filter, 2-stage
high current capability of 16 A
very high broadband damping
2 pieces separating transformers 250 VA
PX 3 is the complete device in the series.
PX 3 offers a 2-stage current capability filter (16A), one 1000 VA transformer for amplifiers and two 250 VA transformers for source devices and preamplifiers.
The medium-sized and big transformer technology for integrated amplifiers or power amplifiers.
Transformers with 1200 VA, 1500 VA and 2500 VA max.
This device is equipped with 4 pieces of 250 VA isolating transformer and allows the separate operation of consumers with lower power requirements, e.g. Preamps, CD players, transducers, etc.
Our PX Power Distributor is a flexible power distributor at a high-end level.
There are 14 Schuko output sockets available. The user can choose between filtered and unfiltered outputs, which can be planned according to demand.
New !
The Ground Anchor is a grounding box that connects your tonearm grounds to your phonostage and effectively reduces airborne, mains, system, and microphonic component noise. The Ground Anchor reduces electrical noise, improving the delicate signal produced during vinyl playback.
Does your system suffer from an irritating buzz or hum that decreases when you touch it?
It’s missing an earth/ground. You need the Groundhog+.
GND control. Take out speaker hum.
The optimum configuration for each system is one Ground/Earth for the whole system. If a system has multiple Grounds/Earths, then it often creates unwanted ground loops. These systems will then have an annoying low-frequency hum (emitted from the speakers).
Current solutions either jeopardise (i) both safety and EMI shielding (e.g. cheater plug), or (ii) EMI shielding. And most are single country (US) uses only.
The GND Defender in the correct way, intelligently detects a ground loop and will cut the ground for that component.
Our multi-talented power conditioner will clean up your dirty mains power and make your music sound clearer.
Analogue buff? Digital junkie? Or like a bit of both? Our AC iPurifier will purify and protect your system.
Enhances the quality of AC electricity for your audio and AV systems.
If you have a mechanical hum, deploy the DC Blocker+
Quiet as a battery. None of the hassle.
<1uV noise floor. Active Noise Cancellation2.
Our audiophile extension block brings super quiet mains power to your system.
Whatever your set-up, digital, analogue or both, the PowerStation will ensure your system receives super quiet mains.
Every system needs a quality power supply to give of its best. PowerLine is a family of compact Power Distribution Units (PDU) that are designed to lift system performance, harnessing ISOL-8's power expertise at an affordable price. In combination with our range of IsoLink shielded mains cables, PowerLine offers a flexible but powerful solution tailored for those who put performance and value first.
The MiniSub has always been at the heart of ISOL-8, providing class leading performance at an affordable price. Improving the MiniSub was a real challenge, thousands of satisfied MiniSub owners across the world proved that it was going to be a difficult act to follow. Through careful development and adaptation we have managed to incorporate many of the innovative technologies found in the highly regarded flagship ISOL-8 SubStations, taking the all new MiniSub Wave and MiniSub Axis a substantial step forward whilst remaining outstanding value for money.


The e-TP60E NCF is a high-end power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.