Image 1 of 1
ISOL-8 AXIS 10 & 20
Ensuring your power supply is as clean as possible can bring substantial performance benefits to all systems both large and small. The ISOL-8 AXIS inline series are a single channel, one box solution with big performance.
Ensuring your power supply is as clean as possible can bring substantial performance benefits to all systems both large and small. The ISOL-8 AXIS inline series are a single channel, one box solution with big performance.
Electrical supplies often contain unwanted DC offset, which causes transformer cores within connected equipment to operate far away from their optimum conditions.
The ISOL-8 Axis circuit addresses this problem by blocking performance-degrading DC from reaching connected equipment, helping transformers operate more cleanly and quietly.
Two models are available - With a 10 amp rating, Axis 10 has an C13 power inlet and fused protection. Axis 20, with a 16 amp rating is protected by a circuit breaker which also functions as a switch. The C19 power inlet has the addtional feature of being rhodium plated and of pure copper construction.
-
Number of available outlets: 1
Type of outlets available: 13A British chassis sockets
European Schuko sockets
15A US socketsStandard mains inlet: 10A IEC C13 – AXIS 10 (cable not supplied)
16A IEC C19 – AXIS 20 (cable not supplied)Dimensions: 240 x 100 x 68mm (W x H x D), excluding connectors
Product weight: AXIS 10: 1.3kg
AXIS 20: 1.5kgKey features: AXIS 10: Silver Plated PTFE Wiring
AXIS 20: Rhodium Plated Pure Copper InletConstruction: Steel chassis with black finish
Mains voltage: 230VAC version: 220–240VAC
117VAC version: 100–127VACMaximum continuous current: AXIS 10: 10 Amps
AXIS 20: 16 Amps
-
The e-TP60E NCF is a high-end power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.
Every system needs a quality power supply to give of its best. PowerLine is a family of compact Power Distribution Units (PDU) that are designed to lift system performance, harnessing ISOL-8's power expertise at an affordable price. In combination with our range of IsoLink shielded mains cables, PowerLine offers a flexible but powerful solution tailored for those who put performance and value first.
Ensuring your power supply is as clean as possible can bring substantial performance benefits to all systems both large and small. The ISOL-8 AXIS inline series are a single channel, one box solution with big performance.
CLEAN POWER. INTELLIGENT ENGINEERING.
The ISOL-8 SubStation F Series is the distillation of 27 years of extensive research into electrical power filtration and distribution.
Designed for systems ranging from high-quality domestic setups to true high-end reference systems, the F Series combines ISOL-8’s proven Axis DC blocking, multi-stage Transmodal filtration, cross-contamination control, high-current delivery and surge protection in a beautifully engineered, hand-built enclosure.
The MiniSub has always been at the heart of ISOL-8, providing class leading performance at an affordable price. Improving the MiniSub was a real challenge, thousands of satisfied MiniSub owners across the world proved that it was going to be a difficult act to follow. Through careful development and adaptation we have managed to incorporate many of the innovative technologies found in the highly regarded flagship ISOL-8 SubStations, taking the all new MiniSub Wave and MiniSub Axis a substantial step forward whilst remaining outstanding value for money.
The SubStation LC, HC and Axis build on the substantial achievements of the Substation Vogue and Qube with a new semi modular format and DC blocking as standard. Standing alone or in combination for even greater performance; they form a flexible, effective solution to satisfy the most demanding audiophile.
On Demo !
The SubStation Integra is a true high performance mains conditioning and distribution solution for a complete system. It combines all the features found in our acclaimed flagship SubStation LC and HC together in one high quality chassis.
The SubStation LCX is our ultimate high performance mains conditioning and distribution solution for all your source components. A full width version of our flagship SubStation LC only in a full width rather than half width high quality chassis. Our customers asked for a model with more outlets and we listened, providing 6 outlets rather than 4. We also further enhanced the performance of this design with one more stage of conditioning.
Inputmodule with four Schuko-outlets. The built-in OVERVOLTAGE PROTECTION ensures electrical safety by keeping away all voltages higher than 250 V from all connected devices. The current input connector is a professional 32 A NEUTRIK-PowerCON with cable lock.
The new second input module
Input module with six Schuko outputs. Electrical operational safety is ensured by the built-in SURGE PROTECTION, which keeps all voltages above 250 volts away from all connected devices. Power input is done with a professional 32 A NEUTRIK – PowerCON connector with cable locking.
The PMS X 2 INPUT FILTER power distributor combines the INPUT and FILTER modules into one device. This saves space. The 6 outputs (gray=filtered, black=unfiltered) can be scheduled as needed.
The SIGNATURE versions of the PMS INPUT X power distributors are the perfect solutions when very high quality requirements are to be met.
„HF-purified“ current:
Power supply systems are excellent antennas for high-frequency interference, generated e.g. from mobile phones. With the mains power, line-connected clocked frequencies and disturbances are transported, which are generated by all types of household appliances, switching power supplies and energy saving sources. These disturbances together produce technical faults in all devices up to defects.
"RF-purified" current:
Power systems are excellent antennas for radio frequency interference emitted by mobile phones, among other things. The mains power is also used to transport wired frequencies and interference generated by all types of household appliances, switched-mode power supplies and energy-saving light sources. Together, these faults create technical malfunction and even defects in all devices.
The PMS FILTER X SIGNATURE power distributor is equipped with a high-frequency filter of the latest design. This filter is symmetrically constructed, 2-stage with a current carrying capacity of 30A. This guarantees the best RF interference attenuation without negative sound influences.
The problems caused by frequently occurring changes in the current (mains frequency, sine function of the mains curve, frequency cuts, DC components, compensation currents etc.) are avoided by the use of an isolation transformer.
For large transformers:
Integrated and power amplifiers are equipped with large power supply units. In order to supply these optimally, large isolating transformers are necessary. Because of their sizes and weights, they cannot be integrated into the PMS plug-in system. Therefore, we have developed the module TRAFO CONTROL. This includes all the techniques necessary for the operation of large transformers and their protection.
DC FILTER 16 A / 230 V with two Schuko output sockets and Neutrik PowerCon - current input. A high-quality power cord with a length of 1.0 m is included.
The DC 2 will be integrated between your wall outlet and power distribution system, or you can connect appropriate devices directly.
DC FILTER 16 A / 230 V with two Schuko output sockets and Neutrik PowerCon - current input. A high-quality power cord with a length of 1.0 m is included.
The SIGNATURE versions of the LS 2 power distributors are the perfect solutions when very high quality requirements are to be met. The Schuko outlets are extremely high-quality VIBORG sockets with contacts made of pure copper/silver/rhodium, mechanically designed to the highest quality. The wiring consists of 4 mm² wires made of pure copper, all individually on distribution blocks affiliated.
A power distribution unit at the highest technical and professional level. The shielding aluminum housing with massive side panels ensures mechanical quality, while socket inserts with copper contacts and internal wiring with pure copper conductors guarantee the lowest possible contact resistance and perfect potential equalization.
The PX 2 Filter is equipped with:
Power filter, 2-stage
high current capability of 16 A
very high broadband damping
2 pieces separating transformers 250 VA
PX 3 is the complete device in the series.
PX 3 offers a 2-stage current capability filter (16A), one 1000 VA transformer for amplifiers and two 250 VA transformers for source devices and preamplifiers.
The medium-sized and big transformer technology for integrated amplifiers or power amplifiers.
Transformers with 1200 VA, 1500 VA and 2500 VA max.
This device is equipped with 4 pieces of 250 VA isolating transformer and allows the separate operation of consumers with lower power requirements, e.g. Preamps, CD players, transducers, etc.
Our PX Power Distributor is a flexible power distributor at a high-end level.
There are 14 Schuko output sockets available. The user can choose between filtered and unfiltered outputs, which can be planned according to demand.
New !
The Ground Anchor is a grounding box that connects your tonearm grounds to your phonostage and effectively reduces airborne, mains, system, and microphonic component noise. The Ground Anchor reduces electrical noise, improving the delicate signal produced during vinyl playback.
Does your system suffer from an irritating buzz or hum that decreases when you touch it?
It’s missing an earth/ground. You need the Groundhog+.


The e-TP60E NCF is a high-end power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.