The F Series is designed around a simple principle: give every component the type of power it needs, while preventing one component from compromising another.
Dedicated filtered outlets are optimised for source components, while high-current outlets provide power amplifiers with the instantaneous current they demand, without compromising dynamics.
Premium components include ISOL-8 custom-wound chokes, the finest polypropylene capacitors and silver-plated copper PTFE-insulated wiring. A CNC-machined 10mm aluminium front panel completes an enclosure built for a lifetime of reliable service.
Available in silver or black, and hand-built in Worcestershire, England, the F Series provides a powerful, sophisticated and dynamically transparent foundation for high-performance audio and AV systems.
The result is clean, controlled power that provides the foundation to allow your system to perform at its full potential all of the time.
Engineered Without Compromise
The F Series uses carefully selected components throughout, including ISOL-8 custom-wound chokes, premium polypropylene capacitors and silver-plated copper wiring with PTFE insulation. Very carefully engineered layouts within the enclosure further enhance the overall performance.
Each unit is hand-built in Worcestershire, England, and housed in a substantial enclosure featuring a CNC-engineered 10mm aluminium front panel.
The F Series isn't simply a mains distribution block. It is a carefully engineered power-management system, designed to provide the clean, stable and dynamically transparent electrical foundation that high-performance audio deserves.
ISOL-8 Axis DC Blocking
Electrical supplies often contain unwanted DC offset, which causes transformer cores within connected equipment to operate far away from their optimum conditions.
The ISOL-8 Axis circuit addresses this problem by blocking performance-degrading DC from reaching connected equipment, helping transformers operate more cleanly and quietly.
Transmodal Filtration
At the heart of the F Series is ISOL-8’s proprietary Transmodal filter technology.
Unlike conventional filters, Transmodal technology is designed to reduce both common-mode and differential-mode noise across an exceptionally broad frequency range, extending effective filtration down to extremely low frequencies.
Importantly, the high-current sections combine effective filtration with exceptionally low series resistance. This allows large instantaneous currents to pass freely to power amplifiers without the dynamic restriction or compression that can occur with conventional filtering.
Powerful filtration.
No compromise to dynamics.
Cross-Contamination Control
Electrical noise doesn't only come from outside the system.
Every connected component can generate its own electrical noise, which can travel through the supply cables and affect every other component. This interaction, we call cross-contamination, can have a significant impact on system performance. Yet another of the solutions we have pioneered.
Source and High-Current Filtration
The F Series separates the different demands of source components from those of amplifiers or power amplifiers.
The source-component section uses multi-stage Transmodal filtration and cross-contamination control to provide a highly filtered supply for sensitive equipment.
The dedicated high-current outlets use a very low-loss Transmodal topology, allowing power amplifiers and other demanding loads to draw substantial instantaneous current while retaining effective mains filtration.
Earth Noise Filtering
A custom-wound ISOL-8 choke provides additional filtering of unwanted noise present on the safety earth wiring, further reducing the opportunity for electrical interference to enter the system.
Surge Protection
Comprehensive surge protection provides an additional level of protection for connected equipment against potentially damaging electrical events.
-
Number of available outlets: 1
Type of outlets available: 13A British chassis sockets
European Schuko sockets
15A US socketsStandard mains inlet: 10A IEC C13 – AXIS 10 (cable not supplied)
16A IEC C19 – AXIS 20 (cable not supplied)Dimensions: 240 x 100 x 68mm (W x H x D), excluding connectors
Product weight: AXIS 10: 1.3kg
AXIS 20: 1.5kgKey features: AXIS 10: Silver Plated PTFE Wiring
AXIS 20: Rhodium Plated Pure Copper InletConstruction: Steel chassis with black finish
Mains voltage: 230VAC version: 220–240VAC
117VAC version: 100–127VACMaximum continuous current: AXIS 10: 10 Amps
AXIS 20: 16 Amps
-


The e-TP60E NCF is a high-end power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.