Image 1 of 3
Image 2 of 3
Image 3 of 3
Kuzma Damper Feet
Damper isolation feet can be used under any audio component to filter structural vibrations, while also acting as noise suppressors for vibrations generated by the component itself. They are sold in sets of 3 or 4 pieces.
Damper isolation feet can be used under any audio component to filter structural vibrations, while also acting as noise suppressors for vibrations generated by the component itself. They are sold in sets of 3 or 4 pieces.
Damper isolation feet can be used under any audio component to filter structural vibrations, while also acting as noise suppressors for vibrations generated by the component itself. They are sold in sets of 3 or 4 pieces.
The top and bottom cups are machined from solid aluminium plate.
The cups are separated by multi-layered silicone and aluminium dampers, which filter vibrations up to 3000 Hz. The dampers can be placed directly under any audio component — whether under a metal plate, spike, or rubber feet.
If the audio component has an off-centre centre of gravity, reposition the dampers accordingly. Note: the dampers do not provide leveling adjustment. The lower cup is fitted with a rubber ring to minimise slipping — this can be removed if desired. For heavier loads, simply add more dampers.
-
Size: D= 67 mm, H= 24 mm ( no load)
Load per damper: 0 - 20 kg
Set of 3: max 60 kg
Set of 4: max 80 kg
