Image 1 of 1
DS Audio SC-001 Sonic Cleaning Brush
The SC-001 Sonic Cleaning Brush is a sonic-vibration cleaning brush whose bristles vibrate 11,000 times per minute. Even the fine dust clinging to the record groove—which an ordinary brush cannot remove—is physically loosened and lifted away by the vibrating bristles. With the groove clean once more, the record's original sound is brought back to life.
The SC-001 Sonic Cleaning Brush is a sonic-vibration cleaning brush whose bristles vibrate 11,000 times per minute. Even the fine dust clinging to the record groove—which an ordinary brush cannot remove—is physically loosened and lifted away by the vibrating bristles. With the groove clean once more, the record's original sound is brought back to life.
Optimal brush material selected through measured dust removal performance
The brush material for the SC-001 was determined through rigorous quantitative analysis. Using high-sensitivity cameras to visualize dust particles on record surfaces, we measured residual dust levels before and after cleaning. Multiple candidate materials were compared based on their actual dust removal rates, and only the material that demonstrated the highest performance was adopted. The “optimal brush material for vibration” can only be derived through measurement under actual vibration. This data-driven approach—measurement-based decisions from the material selection stage onward—forms the foundation of the SC-001's exceptional dust removal performance, which exceeds that of the competitor brushes tested.
Dual static suppression: Low-charging bristles and conductive fibers
Records become statically charged when removed from their sleeves and during brush cleaning. In comparative testing, conventional brushes without anti-static functionality showed little reduction in static charge — in some cases, friction increased it. Even brushes with anti-static functionality achieved only partial reduction, falling short of complete elimination. The SC-001 addresses this through a two-stage approach: low-charging bristle material suppresses new static generation at the source, while conductive fibers integrated at the rear of the vibration drive unit existing discharge charge on the record.
-
Power source: 2 x AAA batteries
Drive method: Brush heads
Brush material: Selected low-charging fibers(Brush head: Replaceable)
Vibration rate: 11,000 RPM
Dimensions: W129 × D37 × H62 mm
Weight: 260 g
-
The SMARTractor is a refined alignment tool, easy to use and resulting in better sonics.
The SMARTractor is a refined alignment tool, easy to use and resulting in better sonics.
The AT617a cartridge stylus cleaner is a specially formulated polyurethane gel that gently removes dirt particles from the stylus tip when the stylus is lowered onto it.
The gel’s surface is washable and will remain tacky for years. Specifications Material: Polyurethane gel Dimensions: 37.5 mm (1.48") diameter × 17 mm (0.67").
Adhesive stylus cleaner that does not stain the needle tip with chemical substances.
The best sounding head shell in the world.
Reduces the number of contacts with the connector, makes the contact with the tone arm more solid, and increases the strength of the head shell body.
Ionizer for a quite playback.
“I can report with complete confidence that the Vinyl Ionizer ION-001 is without a doubt the most effective anti-static device I have ever used. My vinyl playback has never sounded quieter, more revealing, and more enjoyable.” — Positive feedback
The ES-001 eccentricity detection stabilizer earned high praise from analog audio enthusiasts. Inheriting its core design, the ES-002 introduces carefully considered improvements to achieve a higher level of perfection. Enhancements in structure, materials, and balance ensure superior reliability and ease of use in practical applications.
LP Stabilizer with Piezoelectric effects.
The beautifully finished precision machined nonmagnetic stainless steel base and top modules are girdled by a layer of damping carbon fiber. The bottom surface is covered with 16 concentric cushioning grooves made of an extremely effective Piezo Electric damping material.
This is a weight clamp machined from aged solid African blackwood — the same material used for clarinet horns. Its shape helps neutralize vibrations in the record during playback.
On demo !
Many clamps flatten records successfully but have very mixed results on sound quality. As a generalization, most tend to enhance and pump up the bass whilst dulling down the upper mid-band. There is also a perceived softening of dynamics (even in the bass), a slowing down of the sound and the decay of notes suffers.
Please contact us for pricing information.
The essence of the weight clamp is a rigid, solid piece of sapphire. The exceptional rigidity and resilience of sapphire help eliminate vibrations in the record caused by needle chatter and sound from the loudspeakers.
New !
The new Gravity Two record weight removes harmful vibration from your records surface, and delivers enhanced bass depth, impeccable separation, and a midrange that’s richer and clearer.
Damper isolation feet can be used under any audio component to filter structural vibrations, while also acting as noise suppressors for vibrations generated by the component itself. They are sold in sets of 3 or 4 pieces.
Every vinyl enthusiast has records in their collection, or come across LPs they’d love to own, but were just too warped for any cartridge/arm to track. The DF-2 the one-stop, one-button solution to your problems! The DF-2 provides controlled-heat perfect flattening for all your warped records, even those with only slight irregularities just enough to unsettle your cartridge and cause mistracking.
Custom designed to fit every variation of the Technics SL-1200/1300-series — from the legendary 1979 Mk2 DJ workhorse up to the 2026 high-end models G/GR/GR2/GAE/GME. Yes, it fits absolutely all of these models as they have an identical armboard geometry.
Limited edition mounting platform for the Low model. Custom machined to fit the skeletal plinth Rega P8/P10/Naia.
I got countless emails from customers asking how they can get our Low model to work when there is a circular hole just where it needs to be mounted.
The High Mk2 replaces our original High, which has been sold to more than 2,000 happy customers since 2016.
The High Mk2 is essentially a Low Mk2 with two magnetically attached extender bases, giving an adjustable height range of 32–94mm. This makes it a great fit for turntables with thicker platters — VPI, Clearaudio, Dr. Feickert, Kuzma, McIntosh, and many more.
The original model for Rega, Linn, Thorens, Pro-Ject, MoFi Electronics and many more brands.
For turntables with 32-49mm from the mounting surface and up to the underside of the tonearm, measured while the stylus is in the groove.
Precision-machined from solid aluminum and uniquely engineered with 18 internal circuits to eliminate harmful vibrations, the LIVE18 headshell delivers exceptionally clear, natural, and dynamic sound.
On demo !
“The Cartridge Enabler” – decoupler and azimuth adjustment to upgrade all cartridges.
As you might guess, the “Cartridge Enabler” “enables” your cartridge to operate much more effectively. Consisting of a thin material which you fit between the cartridge and headshell, this simple device is one of the most cost effective upgrades you will come across.
A platter mat upgrade is highly effective because it affects the critical interface between your vinyl records and the turntable you play them on. Experimentation with different turntable mats is simple and quick. You find the sonic differences are usually noticeable. Even if your turntable is not supplied with a platter mat, this mat will improve sound quality. Origin Live’s Platter Mat Upgrade makes a far greater difference than most others, bringing a positive difference to every aspect of the music.
New !
The Ground Anchor is a grounding box that connects your tonearm grounds to your phonostage and effectively reduces airborne, mains, system, and microphonic component noise. The Ground Anchor reduces electrical noise, improving the delicate signal produced during vinyl playback.
On demo ! The effects of this platter matt are not to be underestimated: better articulation, mid-bass, tonality and color !
You may have a turntable with a good bearing, motor drive, plinth isolation and so on but the all important interface with the Vinyl record has never been optimised. The Strata Mat will solve this issue.
The Origin Live Technics Armboard enables you to radicaly upgrade your deck to use a Rega RB250, RB300, RB600 or any Origin live arm with your Technics SL1200, SL1210 or turntable.
The SC-001 Sonic Cleaning Brush is a sonic-vibration cleaning brush whose bristles vibrate 11,000 times per minute. Even the fine dust clinging to the record groove—which an ordinary brush cannot remove—is physically loosened and lifted away by the vibrating bristles. With the groove clean once more, the record's original sound is brought back to life.