Image 1 of 3
Image 2 of 3
Image 3 of 3
Origin Live Platter Mat
A platter mat upgrade is highly effective because it affects the critical interface between your vinyl records and the turntable you play them on. Experimentation with different turntable mats is simple and quick. You find the sonic differences are usually noticeable. Even if your turntable is not supplied with a platter mat, this mat will improve sound quality. Origin Live’s Platter Mat Upgrade makes a far greater difference than most others, bringing a positive difference to every aspect of the music.
A platter mat upgrade is highly effective because it affects the critical interface between your vinyl records and the turntable you play them on. Experimentation with different turntable mats is simple and quick. You find the sonic differences are usually noticeable. Even if your turntable is not supplied with a platter mat, this mat will improve sound quality. Origin Live’s Platter Mat Upgrade makes a far greater difference than most others, bringing a positive difference to every aspect of the music.
The Origin Live Platter Mat Upgrade greatly enhances musical enjoyment, by bringing recordings alive. Music becomes better integrated and far more natural. Bass solidifies and timing improves–gone is a muddy bass that blurs performance. An extra octave of bass is often tapped by the Upgrade Platter Mat. The mid-band acquires increased clarity.
Great Mats Have Three Functions
First, it must decouple the record from vibration entering it via the turntable, this includes bearing noise, transmitted motor noise through the drive system, cartridge feedback, chatter transmitted via the tonearm into the turntable, ground and air-borne audio feedback, underground pumps, etc.
Second, it must absorb and transmit resonance out of the record itself. A stylus vibrating in a record groove sets the vinyl resonating in a way that will feedback into the stylus if not highly controlled. This may be momentary to the tiniest fraction of a second, but will nonetheless create a blurring of the signal and overlay other parts so that they will not be heard. In other words, there can be loss of information and addition of spurious noise to the intended signal.
Third, it must transmit the drive to the record without elasticity or slip. The surface that the record sits on in response to the amount of drag on the record. At best, this will be a very slight momentary elastic movement backwards, but enough to slightly deaden the impact of a bass note drum strike. At worst it will cause the record to slip backwards, which is only obvious when you can hear wow occurring–as in the case of a badly dished record that only contacts the platter in the centre.
-
Mat Development: Initially, we introduced a semi-rigid mat that we called the Performance Mat. Feedback was almost universally positive, with users reporting superior performance over the recognised market leaders they already owned. Further experimentation led to a new flexible composite material that sounded even better. Not just a bit better, a lot better. The Upgrade Mat does most things that the Performance Mat does, only it does them better.
Will It Work On My Deck?
Finding a mat that works universally well on all turntables is almost like the quest for the Holy Grail. In over 22 years we have experimented with countless platter mats varying from felt, fibreglass, air gap, various foams, cork, graphite, carbon fibre, acrylic, PVC, MDF, aluminium, rubber, silicon and steel laminates etc. This is to name but a few. Many of these mats yield significant improvements to some areas but have drawbacks in others.
A mat that works well on acrylic platters is almost unheard of, but this one really does the trick! It also interfaces well with metal, glass and composite platters. The Origin Live Upgrade Mat is only 1mm thick, and so is well within the ability of most tonearm height adjusters. The material mix from which it is manufactured must remain confidential.
No-Risk Money Back Guarantee
The mat comes with a money-back guarantee if ordered directly from Origin Live. Should you be in any way dissatisfied, just return the mat for a full refund (excluding carriage). Origin Live dealers may also offer a guarantee but this is at their discretion.
The SMARTractor is a refined alignment tool, easy to use and resulting in better sonics.
The AT617a cartridge stylus cleaner is a specially formulated polyurethane gel that gently removes dirt particles from the stylus tip when the stylus is lowered onto it.
The gel’s surface is washable and will remain tacky for years. Specifications Material: Polyurethane gel Dimensions: 37.5 mm (1.48") diameter × 17 mm (0.67").
Adhesive stylus cleaner that does not stain the needle tip with chemical substances.
The best sounding head shell in the world.
Reduces the number of contacts with the connector, makes the contact with the tone arm more solid, and increases the strength of the head shell body.
Ionizer for a quite playback.
“I can report with complete confidence that the Vinyl Ionizer ION-001 is without a doubt the most effective anti-static device I have ever used. My vinyl playback has never sounded quieter, more revealing, and more enjoyable.” — Positive feedback
The ES-001 eccentricity detection stabilizer earned high praise from analog audio enthusiasts. Inheriting its core design, the ES-002 introduces carefully considered improvements to achieve a higher level of perfection. Enhancements in structure, materials, and balance ensure superior reliability and ease of use in practical applications.
LP Stabilizer with Piezoelectric effects.
The beautifully finished precision machined nonmagnetic stainless steel base and top modules are girdled by a layer of damping carbon fiber. The bottom surface is covered with 16 concentric cushioning grooves made of an extremely effective Piezo Electric damping material.
This is a weight clamp machined from aged solid African blackwood — the same material used for clarinet horns. Its shape helps neutralize vibrations in the record during playback.
On demo !
Many clamps flatten records successfully but have very mixed results on sound quality. As a generalization, most tend to enhance and pump up the bass whilst dulling down the upper mid-band. There is also a perceived softening of dynamics (even in the bass), a slowing down of the sound and the decay of notes suffers.
Please contact us for pricing information.
The essence of the weight clamp is a rigid, solid piece of sapphire. The exceptional rigidity and resilience of sapphire help eliminate vibrations in the record caused by needle chatter and sound from the loudspeakers.
New !
The new Gravity Two record weight removes harmful vibration from your records surface, and delivers enhanced bass depth, impeccable separation, and a midrange that’s richer and clearer.
Damper isolation feet can be used under any audio component to filter structural vibrations, while also acting as noise suppressors for vibrations generated by the component itself. They are sold in sets of 3 or 4 pieces.
Every vinyl enthusiast has records in their collection, or come across LPs they’d love to own, but were just too warped for any cartridge/arm to track. The DF-2 the one-stop, one-button solution to your problems! The DF-2 provides controlled-heat perfect flattening for all your warped records, even those with only slight irregularities just enough to unsettle your cartridge and cause mistracking.
Custom machined to fit the new SL-1300G and every Technics SL-1200 version from the 1979 Mk2 and up to the latest high end models.
Limited edition mounting platform for the Low model. Custom machined to fit the skeletal plinth Rega P8/P10/Naia.
I got countless emails from customers asking how they can get our Low model to work when there is a circular hole just where it needs to be mounted.
The original model for Clearaudio, VPI, Kuzma, Dr. Feickert, McIntosh, and many more brands.
For turntables with 48-81mm from the mounting surface and up to the underside of the tonearm, measured while the stylus is in the groove.
The original model for Rega, Linn, Thorens, Pro-Ject, MoFi Electronics and many more brands.
For turntables with 32-49mm from the mounting surface and up to the underside of the tonearm, measured while the stylus is in the groove.
Precision-machined from solid aluminum and uniquely engineered with 18 internal circuits to eliminate harmful vibrations, the LIVE18 headshell delivers exceptionally clear, natural, and dynamic sound.
On demo !
“The Cartridge Enabler” – decoupler and azimuth adjustment to upgrade all cartridges.
As you might guess, the “Cartridge Enabler” “enables” your cartridge to operate much more effectively. Consisting of a thin material which you fit between the cartridge and headshell, this simple device is one of the most cost effective upgrades you will come across.
A platter mat upgrade is highly effective because it affects the critical interface between your vinyl records and the turntable you play them on. Experimentation with different turntable mats is simple and quick. You find the sonic differences are usually noticeable. Even if your turntable is not supplied with a platter mat, this mat will improve sound quality. Origin Live’s Platter Mat Upgrade makes a far greater difference than most others, bringing a positive difference to every aspect of the music.
New !
The Ground Anchor is a grounding box that connects your tonearm grounds to your phonostage and effectively reduces airborne, mains, system, and microphonic component noise. The Ground Anchor reduces electrical noise, improving the delicate signal produced during vinyl playback.
On demo ! The effects of this platter matt are not to be underestimated: better articulation, mid-bass, tonality and color !
You may have a turntable with a good bearing, motor drive, plinth isolation and so on but the all important interface with the Vinyl record has never been optimised. The Strata Mat will solve this issue.
The Origin Live Technics Armboard enables you to radicaly upgrade your deck to use a Rega RB250, RB300, RB600 or any Origin live arm with your Technics SL1200, SL1210 or turntable.
Tonearm Adaptor mount for Origin Live and Rega arms. This is suitible for use on Linn armboards 4mm thick and above.
This mount can also be used for fitting Origin Live arms to armboards thicker than 28mm as the arm is clamped up with a grub screw in the side, instead of the usual nut on the threaded base.


The SMARTractor is a refined alignment tool, easy to use and resulting in better sonics.