The Best Sound Directly To Your Speakers
INTEGRO is ready to plug & play device, just connect your speakers to it and you have a complete HiFi system to enjoy your music to the fullest.
No need for extra equipment, all of the components necessary come in a compact design, giving you the possibility to put the Integro in any place you want.
Enjoy Music From Your Favorite Sources
Integro lets you stream from your favorite music services
Bring your content from local or network-attached drives and play internet radio
A Look To Be Seen An Felt
Every aspect of the Integro was carefully designed with the collaboration of the Red Dot Award winner Design Narratives.
In addition to the compact design, the electronics that give Integro its musicality are covered in a chassis of antimagnetic aluminum, with two orange knobs to control volume and inputs options, accompanied by an OLED display.
Easy Setup
Getting started just takes a couple of minutes with the Volumio official iOS and Android apps
Made in Italy
All Volumio products are proudly designed and assembled in Florence Italy
Roon Ready
All Volumio products are Roon Ready certified by Roon Labs. allowing seamless integration with Roon
All The Connections You Need
Integro has one single-ended analog input (RCA) and two digital SPDIF both optical and coaxial. In terms of outputs there is a subwoofer out, and the HDMI out can be used to take advantage of the OSD menu of Volumio.
Volumio Premiu Built In
On board, the Integro is the latest version of Volumio – Volumio AI- that incorporates Supersearch an AI-powered search function that is meant to optimize your music discovery.
Volumio OS comes with a Multi-room capability that creates an integrated environment with other Volumio stations in your home.
-
AUDIO
Audio playback: Bit-Perfect up to 192kHz/24 bit.
Analogue Input: 1x Stereo RCA
Digital Inputs: SPDIF Coaxial and Optical
Subwoofer Output: 1 x RCA
Headphone Output: High quality (jack 6.3mm)
Video output: HDMI
INPUT & OUTPUT
Speaker Amplifier: Sample frequency up to 192kHz/24bit resolution / Output Power: 2x50W RMS with 8 Ohm load, 2x70W RMS with 4 Ohm load / Powered by two MA12070P amplifiers from Infineon, in dual-mono configuration (PBTL Mode) / Output stage made with WIMA polypropylene capacitors and high saturation-current inductors.
Headphone amplifier: High-quality 6.3mm jack connector, with headphone insertion detection / Sample frequency:up to 192kHz/24bit resolution / Output Power: 2x300mW RMS with 64Ohm load, 2x480mW with 32Ohm load / Powered by PCM5122 DAC from Texas Instruments, together with a TPA6120A2 headphone amplifier from Texas Instruments.
Subwoofer output: Mono RCA connector / Sample frequency up to: 192kHz/24bit resolution / Signal level 2Vrms / Powered by PCM5121 DAC from Texas Instruments, together with an OPAMP-based summing circuit for the mono down-mix.
Analog input: Stereo RCA connector / Sample frequency up to: 192kHz/24bit resolution / Powered by PCM1861 ADC from Texas Instruments
Digital input: Coaxial RCA connector and optical TOSLINK connector / Sample frequency up to: 192kHz/24bit resolution / Powered by WM8805 from Wolfson Microelectronic (acquired by Cirrus Logic).
POWER & CONNECTIVITY
Power: 2x50W RMS with 8 Ohm load, 2x70W RMS with 4 Ohm load.
USB: 1x USB3.0, 1x USB 2.0
LAN: Gigabit 10/100/1000M
Wireless: Wi-Fi 802.11a/b/g/n/ac, 2X2 MIMO with RSDB
Bluetooth: 5.0 APT-X, APT-X LL.
ADDITIONAL INFORMATION
UPNP DLNA: Renderer with Open Home support
Supported Services: Airplay via Shairport Sync, Spotify & Spotify Connect, TIDAL & TIDAL Connect, QOBUZ
Available Plugins: Youtube, Squeezelite, Radio Paradise, Podcasts, Pandora, Fusion DSP, Roon Bridge, Soundcloud, Mixcloud
CPU: Amlogic S905D3, Quad Core 1.9 GHz
RAM: 2 GB DDR4
Internal Storage: 16 GB EMMCz
Power Supply: 24 V CC, 6A
Included Accessories: PSU AC 100-240 V CA
-


The e-TP60E NCF is a high-end power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.