Image 1 of 2
Image 2 of 2
Sugden A21SE Stage Two Phono Stage
There are two dedicated phono amplifiers in the Sugden range and both are borne from our passion for vinyl. The Stage Two offers exceptional value for money with facilities to cater for both MM and MC cartridges. The design is a two box system separating the power supply from the amplifier. The phono amplifier has fixed loading for MM and 100 and 470 Ohm selection for MC.
Our design criteria was to produce a product that was as neutral as possible, retaining a faithful and enjoyable analogue sound.
There are two dedicated phono amplifiers in the Sugden range and both are borne from our passion for vinyl. The Stage Two offers exceptional value for money with facilities to cater for both MM and MC cartridges. The design is a two box system separating the power supply from the amplifier. The phono amplifier has fixed loading for MM and 100 and 470 Ohm selection for MC.
Our design criteria was to produce a product that was as neutral as possible, retaining a faithful and enjoyable analogue sound.
About the A21 Signature Series
A combination of superb sound and solid engineering has made the A21 a reference amplifier for fifty years. The secret of its continued success is a pure class A single ended voltage rail design that has evolved and been carefully upgraded. A special signature model is now available for both the A21 and A21SE versions offering even better sound and performance.
-
Inputs: Moving magnet, Moving coil — LTVS power in
Outputs: Fixed line level output
Gain Adjustment: Internal selection for MM or MC
Load Adjustment: Internal for MC 100 and 470 Ohms — MM fixed load 47k
Earth Terminal: Screw type
External Power Supply: Mains powered
Input Sensitivity: MM 3.0mV MC 0.15mV
Output: 350mV
Frequency Response: +/-1.5dB 20Hz-20kHz
Signal to Noise: >64dB
Gross Weight (packed): 2kgs
Dimensions: Phono amplifier 60 x 140 x 77mm (hwd) — Power supply 50 x 140 x 77mm (hwd)
The manufacturer reserves the right to change specifications without notice.
